Keypad; Standard Key Functions - Cardinal 190 Installation, Technical And Operation Manual

Standard Key Functions

The Model 190 is equipped with a 7-key Capacitive Touch keypad. The keypad is used to
enter commands and data into the indicator. This section describes each key along with its
normal function. It is helpful to refer to the actual indicator while reading this section.
The Model 190 uses a capacitive touch keypad that requires a "finger touch"
to function. The keypad will not operate with other items such as pens,
pencils, or tools.
Key
ON/OFF: The ON/OFF key is used to turn the scale on and off.
• Press the ON/OFF key when the scale is off to turn the scale ON. The
indicator will perform a display test (turn on all segments) and then
show the model number and software version.
• If the scale is already on, press the ON/OFF key and hold for 2 to 3
seconds. When the display shows OFF, release the key to turn the
scale OFF.
8400-M022-O1 Rev K  Model 190 Indicator

KEYPAD

Figure No. 11
Description
49