Precautions; Static Electricity; Batteries - Cardinal 190 Installation, Technical And Operation Manual

Static Electricity

CAUTION! This device contains static-sensitive circuit cards and components.
Improper handling of these devices or printed circuit cards can result in damage to
or destruction of the component or card. Such actual and/or consequential damage
IS NOT covered under warranty and is the responsibility of the device owner.
Electronic components must be handled only by qualified electronic technicians
who follow the guidelines listed below.
ATTENTION! ALWAYS use a properly grounded wrist strap when handling,
removing, or installing electronic circuit cards or components. Make certain that the
wrist strap ground lead is securely attached to an adequate ground. If you are
uncertain of the quality of the ground, you should consult a licensed electrician.
ALWAYS handle printed circuit card assemblies by the outermost edges.
NEVER touch the components, component leads, or connectors.
ALWAYS observe warning labels on static protective bags and packaging and
never remove the card or component from the packaging until ready for use.
ALWAYS store and transport electronic printed circuit cards and components in
anti-static protective bags or packaging.

Batteries

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
ATTENTION: RISQUE D'EXPLOSION SI LA BATTERIES EST REMPLACE'E PAR
UN TYPE INCORRECT. REJETEZ LES BATTERIES UTILISE'ES SELON LES
INSTRUCTIONS.
4

PRECAUTIONS

8400-M022-O1 Rev K  Model 190 Indicator