Cardinal 190 Installation, Technical And Operation Manual page 45

groSS= (Gross Weight Print Location)
Press the TARE  key to show the current setting for the Gross Weight Print Location.
If the setting displayed is acceptable, press the TARE  key again to save it.
Otherwise, use the Fn/ and UNITS/ keys to enter a new location and press the
TARE  key to save it.
tArE= (Tare Weight Print Location)
Press the TARE  key to show the current setting for the Tare Weight Print Location.
If the setting displayed is acceptable, press the TARE  key again to save it.
Otherwise, use the Fn/ and UNITS/ keys to enter a new location and press the
TARE  key to save it.
nEt= (Net Weight Print Location)
Press the TARE  key to show the current setting for the Net Weight Print Location. If
the setting displayed is acceptable, press the TARE  key again to save it.
Otherwise, use the Fn/ and UNITS/ keys to enter a new location and press the
TARE  key to save it.
g ACC= (Gross Weight Accumulator Print Location)
Press the TARE  key to show the current setting for the Gross Weight Accumulator Print
Location. If the setting displayed is acceptable, press the TARE  key again to save it.
Otherwise, use the Fn/ and UNITS/ keys to enter a new location and press the
TARE  key to save it.
n ACC= (Net Weight Accumulator Print Location)
Press the TARE  key to show the current setting for the Net Weight Accumulator Print
Location. If the setting displayed is acceptable, press the TARE  key again to save it.
Otherwise, use the Fn/ and UNITS/ keys to enter a new location and press the
TARE  key to save it.
CoUnt= (Count "number of pieces on the scale" Print Location)
Press the TARE  key to show the current setting for the Count Print Location. If the setting
displayed is acceptable, press the TARE  key again to save it.
Otherwise, use the Fn/ and UNITS/ keys to enter a new location and press the
TARE  key to save it.
8400-M022-O1 Rev K  Model 190 Indicator 37