Physical Layout; Tetra Dimensions; Hardware Assembly; Figure 3. Tetra Board Dimensions And Mounting Holes - VersaLogic Tetra VL-EPC-2700 Hardware Reference Manual

Physical Layout

Tetra Dimensions

The figure below shows board dimensions to help with pre-production planning and layout.

Figure 3. Tetra Board Dimensions and Mounting Holes

(Not to scale. All dimensions in millimeters.)

Hardware Assembly

The entire assembly can fit on a tabletop. When bolting the unit down, make sure to secure all
standoffs to the mounting surface to prevent circuit board flexing. Standoffs secure the top circuit
board using four pan head screws.
12
Configuration and Setup
Tetra (VL-EPC-2700) Reference Manual