Installation Iz16E-000-X-Xx.x-X With A Mounting Angle - ELGO Electronic IZ16E-000 Series Operation Manual

9.3.2 Installation IZ16E-000-x-xx.x-x with a mounting angle

The mounting angle is available in the accessory, with reference to part 11.1.
The detent of the device in the mounting angle is achieved by four slide clips ("Snap-In Mounting").
For this purpose no tools or special tools are needed. The IZ16E is delivered with a separate seal.
The mounting of the seal is necessary for the correct hold in the mounting angle.
The openings on the side of the IZ16E must be closed with the enclosed stickers (dust protection).
28