Handling; Identification; Dimensions Of The Magnetic Tape - ELGO Electronic IZ16E-000 Series Operation Manual

6.3.2 Handling

In order to avoid tension in the tape, it must not be stretched, compressed or twisted.
It should be stored with the magnetized plastic tape to the outside (see Figure 2), the minimum bending radius
must be noted here (see section 6.3.5).
Figure 2: Handling

6.3.3 Identification

The tape is characterized by continuous with a unique serial number and type of tape. Only the scope of delivery
(see section Fehler! Verweisquelle konnte nicht gefunden werden., „Option") is not apparent on the printing.

6.3.4 Dimensions of the Magnetic Tape

A) Magnetic Tape Set:
Consisting of the basic components:
B) Magnetic tape:
C) Cover band:
Magnetized
Plastic tape
Steel tape
MB20-25-10-1-R
MB20-25-10-1-R-C
SB-20-10-01-14404
Protective sheet
Protective sheet
(Standard- Delivery)
(without cover band)
(AB10)
20
Technical Data
B
A
C