Installing into a high cabinet/oven towers
The power supply to the appliance must be turned off before installation
Correct air ventilation is critical to the correct functioning of this appliance and must be strictly
observed.
The oven should be eased or slid into place at such an angle that the cabinetry and or oven is not
damaged.
The dimensions and placement of the ventillation cut outs are critical to the correct
functioning of this appliance. Special note must be taken in tower installations that the
cutout requirements extend to both the panel supporting the oven and the panel directly
above the oven. It further extends to the full extent of the oven tower. This is commonly
referred to as a "chimney". Cut out requirements must not be varied
- 24 -