Table of Contents
Advertisement
Q: What should I do if the oven doesn't heat up?
A: Check to see if one of the following actions resolves the issue:
● The oven may not be switched on. Switch the oven on.
● The clock may not be set. Set the clock (see section "Setting the clock").
● Check to see if the required settings have been applied.
● A household fuse may have blown or a circuit breaker may have tripped. Replace the fuses
or reset the circuit. If this happens repeatedly, call an authorised electrician.
Q: What should I do if, even though the oven function and temperature have been set, the oven
does not heat up?
A:There may be problems with the internal electrical connections. Contact Parmco
Q: What should I do if an error code appears and the oven does not heat up?
A: There is a fault in the internal electrical circuit connection. Contact Parmco
Q: What should I do if the time display is blinking?
A: There was a power failure. Set the clock (see section "Setting the clock").
Q: What should I do if the oven light doesn't illuminate?
A: The oven light is faulty. Replace the oven light bulb (see section "Changing the lamp").
Q: What should I do if the oven's fan is running without having been set?
A: Following use, the oven's fan runs until the oven has cooled down.
Error and Safety codes
Error and Safety codes
Er 3 or Er 4
Er 0
General Functions
TEMP SENSOR ERROR
COMMUNICATION FAILURE
Solution
Call Parmco
Call Parmco
- 22 -
Advertisement
Table of Contents
