Table of Contents
Advertisement
Installer manual Foleo 5800 XTR - Programming
5.4
Master setting programming
Info
If a regeneration is scheduled to occur while in master settings, the scheduled
regeneration will start as soon as exiting the master setting.
Due to the complexity of these settings and the potential for errors, master settings
should only be accessed by your local water professional.
Caution - material
Incorrect system operating due to improper master settings adjusting !
Before entering master settings please contact your professional water dealer.
The following is a detailed overview of settings available in Master Settings. Please see Format
screen [
→
Page 50] for the complete set of values and ranges available to program while in
master settings.
5.4.1
Format screen
From the master settings screen press the format button to display the format screen.
language: Displays the language used on the controller: English, French, German, Italian,
Spanish, Dutch or Portuguese.
units: Contains settings for the unit type (either US or Metric) to be used in the controller.
hardness units: Contains settings for hardness units of measure (grains per gallon, mg/L or ppm,
German degrees, French degrees, or Clark degrees).
Info
Hardness units are adjustable only if metric units are selected.
Degree hardness units are converted to ppm upon input. Degree inputs may be rounded
up or down to the nearest ppm equivalent.
Press the screen navigation arrows at the upper-right and left of the screen to navigate to the
assistance name, assistance phone, and assistance interval screens. See Quick program guide
[
→
Page 40] for more information about these settings.
Press
to save changes or press
50 / 108
Format
language
units
hardness units
to return to the master setting screen without saving.
english
metric
mg/L
Ref. MKT-IM-038 / E - 22.10.2021
Advertisement
Table of Contents
