SAFETY IMPORTANT SAFETY INSTRUCTIONS 10. Personal Safety: SAVE THESE INSTRUCTIONS - This manual contains Wear safety glasses at all times when working important instructions that should be followed during with pumps. installation, operation, and maintenance of the product. Keep work area clean, uncluttered and properly This is the safety alert symbol.
The pump must be standing in at least 1/2” (12.7mm) of water before starting it 1” (25.4 mm) is better. The Pentair Flotec Submersible Utility Pump is designed for shaft seal is water lubricated and may be damaged if draining water from basement floors, stock tanks, window pump runs dry.
Pump won’t start or run Defective motor Replace pump. If impeller won’t turn, for models FP0S1300X and Impeller FP0S1600X, remove the screen. Locate the source of binding. When an extension cord is necessary use as short of a Low line voltage cord as possible.
You must pay all labor and shipping charges necessary to replace product covered by this warranty. This warranty does not apply to the following: (1) acts of God; (2) products which, in the sole judgment of Pentair Flotec, have been subject to negligence, abuse, accident, misapplication, tampering, or alteration;...
Page 8
293 Wright Street | Delavan, WI 53115 | Ph: 800.365.6832 | Orders Fax: 800.526.3757 | pentair.com All indicated Pentair trademarks and logos are property of Pentair. Third party registered and unregistered trademarks and logos are the property of their respective owners. Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice.
Need help?
Do you have a question about the FP0S1300X and is the answer not in the manual?
Questions and answers