Table of Contents
Advertisement
MENU
Pump Menu: Speeds 1-8
SPEED 1-8
Pump Operating Modes
The Sparus
Pump with Constant Flow Technology
™
can be programmed in three different modes: Manual,
Schedule, and Egg Timer.
Speeds 1-4 can be programmed in all three modes.
Speeds 5-8 can only be programmed in Schedule
mode since there are no buttons on the control panel
for Speeds 5-8. The default setting for Speeds 5-8 is
"Disabled".
Manual
Speed 1 (1-4)
Schedule
Egg Timer
Disabled
Speed 5 (5-8)
Schedule
Set Speeds in Manual or Egg Timer Mode
(Speeds 1-4 Only)
1. Press Menu.
2. Use Up or Down arrows to scroll to "Speed 1-8",
then press Select.
3. Use Up or Down arrows to find the speed (1-4) you
wish to program.
4. Press
Select.
Speeds 1-4 default setting is
Manual. To set a speed in Manual mode, press the
Down arrow ("Set Speed" will display) and press
Select to change. Use the Up or Down arrow to
adjust speed.
5. Press Enter to save the new speed setting.
Continue below to Step 6 to set a speed in Egg
Timer mode.
6. Press Select and
scroll to "Egg Timer".
Press Enter.
7. Press the
Down arrow to display "Time".
8. Press Select
and use arrow keys to adjust time.
9. Press Enter to save the new time setting.
10. Press Escape to exit.
Manual
Speed 1 (1-4)
Schedule
Egg Timer
Disabled
Speed 5 (5-8)
Schedule
Set Speed - Default: MANUAL
Set Speed
Set Start Time
Set Stop Time
Set Speed
Time
Default: Disabled
Set Speed
Set Start Time
Set Stop Time
Set Speed - Default: MANUAL
Set Speed
Set Start Time
•
Manual: Assigns a speed to one of the four Speed
Set Stop Time
buttons on the control panel. This mode can only be
Set Speed
used for speeds 1-4.
Time
To operate in Manual mode, press one of the four
Default: Disabled
speed buttons and then press the Start/Stop button.
Set Speed
The pump will run the assigned speed for that
Set Start Time
speed button.
Set Stop Time
•
Egg Timer: Speeds 1-4 can be programmed to run
for a duration of time once a speed button is pressed.
To operate in Egg Timer mode, press a speed
button and then press Start/Stop. The pump will run
that speed for the set amount of time and then turn
off.
•
Schedule: Program speeds 1-8 start and stop at
a specific time during a 24 hour period. Speeds
programmed in Schedule mode will override any
manually selected speed (speeds set by manually
pressing any of the speed buttons on the control
panel).
SPARUS
Pump with Constant Flow Technology Installation and User's Guide
™
12:15p
Manual
Set Speed
Manual Mode Menu Screen
12:15p
Egg Timer
Time
Egg Timer Menu Screen
11
Advertisement
Table of Contents
