Pentair FOLEO 5800 XTR Installer Manual page 89

8.5.7.7 Encoding wheel cleaning
1. Remove the optical sensor, see BLFC cleaning.
2. Remove the plate
3. Remove and clean the encoding wheel (6).
4. Eventually, removing the encoding wheel will cause the brine cam
wheel (5) to fall. Remount starting with the brine cam (3), aligning the positioning holes (4)
with the backplate hole (2).
5. Reverse above procedure steps to rebuild.
Ref. MKT-IM-038 / E - 22.10.2021
(7) by pushing the 4 clips (1).
Installer manual Foleo 5800 XTR - Maintenance
(3) and the gearbox output
89 / 108