Table of Contents
Advertisement
8.5.7.5
Power head disassembly/replacement
1. Remove the softener cover, see First steps [
[
→
Page 75].
2. Using a 6 mm wrench or flat screwdriver, unscrew (2).
3. Using a 8 mm wrench or flat screwdriver, unscrew (1).
4. Separate the power head
5. Change the power head (3).
6. Reverse above procedure steps to rebuild.
Caution - material
When assembling the gearing system
brighter part of the piston axe
shown.
Tip
These operations need to be performed before any cleaning or maintenance procedure.
Ref. MKT-IM-038 / E - 22.10.2021
→
Page 74] and Softener cover removal
(3)
from the valve body (4).
(3)
on the valve body (4), make sure to put the
(5)
on the left when looking at the valve from behind as
Installer manual Foleo 5800 XTR - Maintenance
87 / 108
Advertisement
Table of Contents
