Default Event Mark Settings; How To Find Number Of Points Used - Suzuki SMD16 Operator's Manual

5.5.2

Default event mark settings

1. Open the home screen, then tap [Settings] - [Points].
2. Tap [Default Event1 Symbol], [Default Event1 Color], or [Icons Set].
3. Tap required option.
To change the point size, operate the slider bar (or software keyboard) for [Points
Size].
4. Tap the close button to finish.
Note: If you do not require event marks 2 - 6, turn on [Record Event1 Automatically]
in the [Points] menu. In this case, the pop-up menu does not appear when you register
an event mark. See section 5.2.2.
5.6

How to Find Number of Points Used

Open the home screen, then tap
[Settings] - [General]. Find [Points]
in the [DATA USAGE] section. In
the example below, 16 of 30,000
points have been used.
Icons Set
5. POINTS, EVENT MARKS
[Default Event1 Symbol]
[Default Event1 Color]
99/100
5-7