6. POINTS AND POLYLINES
2. Tap [Restore Default Settings] in the right-hand side of the screen. A confirmation
message appears.
3. Tap [Yes] to restore default settings for the [Points] menu, or tap [No] to cancel.
4. Tap the [x] at the top-right corner of the menu to close the menu.
6.3
Point/Event Mark Creation
6.3.1
How to create a point
There are two methods you can use to create a point; directly on-screen, or from the
slide-out menu.
Directly on-screen
Tap the location where you want to create a point, then tap [New Point] in the pop up
menu.
From the slide-out menu
Swipe the right-hand side of the screen leftwards to show the slide-out menu, then tap
[Lat/Lon]. Enter the coordinates for the new point, then tap [OK].
6.3.2
How to create an event mark
With the [Function Gesture] feature
Tap, or double tap, the screen, using two fingers simultaneously.
Note: The [Function Gesture] feature must be set beforehand to [Event] from the
[Home] => [Settings] => [General] => [Function Gestures] menu.
From the slide-out menu
Swipe the right-hand side of the screen leftwards to show the slide-out menu, then tap
[Event Mark].
6-2