Control Unit Mcu-005 - Suzuki SMD16 Operator's Manual

1.2.3

Control Unit MCU-005

No. Key Name
1 Power lamp
2 EVENT key
3 GAIN/TX key
4 MENU key
5 HOME/BRILL key
6 CANCEL/MOB key
7 CTRL key
8 EDGE key
9 FUNCTION GESTURE key Activates the function set at [Function Gesture] in the [Gener-
When the power is on, the lamp is lit.
Inscribes an event mark at your current position.
Short press:
• Adjusts the radar gain/AC SEA/AC RAIN or adjust the Fish
Finder/Multi-beam Sounder gain.
Long press:
• Toggles between Standby and Transmit for the radar.
Open/close the menu.
Short press:
• Opens the home screen.
Long press:
• Opens the Brilliance/Power window.
Short press:
• Closes menus/windows.
• Stops the aural alarm.
• Ends the tool mode (End Route, End Move, etc.).
Long press:
• Enters the MOB mark (at the own ship's position).
Switches between displays that can be controlled with the
MCU-005 (when multiple displays are installed in the same
network).
Press the EDGE key, then tap the cursor pad in the desired di-
rection.
- Layers menu
Press
- Quick page
Press
Note: You can also use the scrolling pad to open the above
menus.
al] menu.
1. SYSTEM INTRODUCTION
Description
- Slide-out menu
Tap
Press
- Data area
Tap
Press
Tap
Tap
1-7