Fuel Management System - Suzuki SMD16 Operator's Manual

2. ENGINE DISPLAY
How to add the Engine display
Ten full size and six split screen Engine displays are preset in this equipment. If the
displays do not meet your requirements, you may add custom displays as necessary.
A maximum of ten each of full screen and split screen displays is available.
1. Tap the Engine display to show the pop-up menu, then tap [Add Page] on the
menu.
Note: If you have reached the capacity for the screen configuration selected, [Add
Page] is grayed out. Remove an unnecessary page referring to "How to remove
the Engine display" on page 2-11.
2. The software keyboard appears; enter a name for the page then tap []. A blank
page appears.
3. Tap the blank page to show the [Add Instrument] pop-up menu.
4. Tap the item to add.
5. Repeat step 4 to add other items.
6. After you have added all items required, tap [End Edit].
The page name appears in the [Choice of The Config Type] pop-up menu.
2.2.4

Fuel management system

This equipment can calculate the remaining fuel from the total fuel and the fuel con-
sumption rate. This function requires the NMEA 2000 sentence PGN127489 (Engine
Fuel Rate).
Note: The remaining fuel calculation is for reference purposes. Do not use the results
for navigation planning or emergency purposes. During an entire voyage, select one
Multi-Function Display for the calculation at start-up. The calculation of remaining fuel
is not done when the unit is powered off.
2-12