How To Display Target Data; How To Stop Tracking Targets - Suzuki SMD16 Operator's Manual

7. RADAR
This feature, when active, runs in the background immediately after the start of trans-
mission. Targets are acquired in order of distance from own ship, from nearest to fur-
thest. Once a target is acquired, tracking continues regardless of subsequent Doppler
behavior, even if the target becomes stationary. Targets can still be manually acquired
provided that the capacity for automatic acquisition has not been reached.
Auto acquisition by Doppler is [OFF] in the default setting. To activate this feature,
open the [Radar] menu, then turn on [Auto acquire by Doppler].
This feature requires the radar sensor FURUNO DRS4D-NXT/DRS6A-NXT and posi-
tion and heading inputs.
7.28.5

How to display target data

You can find the bearing, range, etc. of an ARPA target. Tap the ARPA target to get
its simple information in the pop-up menu. For detailed information, tap the ARPA tar-
get to display the pop-up menu, then tap [Info].
Simple information
7.28.6

How to stop tracking targets

You can stop tracking ARPA targets individually or all together.
Individual target
Tap the ARPA target to display the pop-up menu, then tap [Cancel] to stop tracking
and delete the ARPA target from the screen.
All targets
Open the slide-out menu, tap [ARPA], then tap [Cancel All] to delete all targets from
the screen.
7-34
Tide
NavData
Detailed information
Cancel All
Clear Lost
S