Suzuki SMD16 Operator's Manual page 25

1. SYSTEM INTRODUCTION
No. Key Name
10 CURSOR key and cursor
pad
CURSOR key CURSOR key
11 STBY/AUTO key
12 POINTS/ROUTE key
13 Rotary knob
14 RANGE OUT/IN key
15 SHIP/3D key and scrolling
pad
Scrolling Scrolling
SHIP
3D
SHIP/3D SHIP/3D
1-8
CURSOR key short press:
• Opens pop up menus.
• Activates/confirms the item selected by the cursor.
Cursorpad
CURSOR key long press:
• Edit display icon (on home screen).
Cursorpad operation:
• Moves the selection cursor. Selected items are highlighted.
Note: CURSOR key "short press" and "long press" operations
are the same as "tap" and "long tap" operations respectively.
Switches the steering mode of the connected FURUNO
NAVpilot series between the STBY and AUTO modes.
Short press:
• Sets the cursor location as a point.
Long press:
• Starts a route from the cursor location.
Short press:
• Opens pop up menus.
• Activates/confirms the item selected by the cursor.
Long press:
• Edit display icon (on home screen).
Rotate:
• Moves the selection cursor. Selected items are highlighted.
• Zooms in/out.
Note: Rotary knob "short press" and "long press" operations
are the same as "tap" and "long tap" operations respectively.
• Moves the selection cursor. Selected items are highlighted.
• Zoom in/out.
• Changes the range for the radar/fish finder.
SHIP/3D key short press:
• Returns own ship to center of screen (Plotter/Weather/Ra-
dar display).
• Cancels the echo history (Fish finder display).
pad pad SHIP/3D key long press:
• Switches between 2D and 3D display.
Scrolling pad:
• Moves the selection cursor. Selected items are highlighted.
button button
• Zooms in/out.
Description