Boundary Lines; How To Show Or Hide Boundary Lines; How To Find Boundary Lines Data; How To Find The Number Of Boundary Points Used - Suzuki SMD16 Operator's Manual

5. POINTS, EVENT MARKS
5.15

Boundary Lines

Boundary lines imported into the equipment can be shown on the display and edited
as necessary. A maximum of 100 boundary lines can be shown. For how to import
boundary lines, see section 10.3.
Note 1: Boundary lines cannot be created on this equipment.
Note 2: TIMEZERO Marine Software is required to import boundary lines.
5.15.1

How to show or hide boundary lines

On the Layers menu, turn [Points] [ON] or [OFF].
5.15.2

How to find boundary lines data

Tap a boundary line to show its data. The data includes latitude and longitude position
of the boundary line, and range and bearing from own ship to the boundary line.
5.15.3

How to find the number of boundary points used

On the home screen, tap [Settings] - [General]. Find [Boundaries] in the [DATA US-
AGE] section. In the example below, 99 boundary points out of 100 have been used.
5-18
Home
Lat
Lon
Range
Bearing
Name
Color
Pattern
Comment
Delete
Boundary line
Center Vessel