Dual-Range Display - Suzuki SMD16 Operator's Manual

Multi-function display
Hide thumbs Also See for SMD16:
Table of Contents

Advertisement

7.21

Dual-Range Display

The dual-range display scans and displays two different radar ranges at the same
time, with a single antenna. There is no time delay between the two pictures and, with
the magnetron radar, you have separate control of each picture. (The solid state radar
has some restrictions. See the table below for details.) This feature lets you keep a
close watch on close-range targets and far targets.
Long range display
Note: Radar sensor FURUNO DRS4DL/DRS4DL+ does not have the dual-range dis-
play.
To get the dual-range display, set dual-range displays on the home screen. See
paragraph 1.7.1 for the procedure. You can put the dual-range displays in the two-way
and 3-way split screens.
Most radar functions can be adjusted independently. The table below shows radar
function and operability in the dual range mode, for both the magnetron radar and the
solid state radar. Note that, in the worst case, the maximum detection range may de-
crease by approx. 10 dB with the solid state radar.
Radar function
Route (show, hide)
AIS/ARPA (show, hide)
Auto sea mode ([Advanced] or [Coastal]
Gain
Heading line (hide temporarily)
Operation mode (head-up or north-up)
Rain clutter
Range scale control
Range max. range scale
Range rings (show, hide)
RezBoost
Sea clutter
Clear trail
TX
Short range display
Status in dual range mode
Magnetron radar
Independent
Independent
Independent
Independent
Independent
Independent
Independent
Independent
36 NM
Independent
-
Independent
Independent
7. RADAR
TX
Solid state radar
Independent
Independent
Interlocked
Interlocked
Independent
Independent
Interlocked
Independent
12 NM
Independent
Independent
Interlocked
Independent
7-21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smd12

Table of Contents