7.8.6
How to measure the bearing with the EBL
Method 1: From the data area
Open the data area. Tap the EBL indication in the [EBL/VRM] data box. Drag the EBL
or slider to set the EBL. Tap [End EBL] to anchor the EBL and finish. The bearing of
the EBL appears to the left of the slider bar and in the [EBL/VRM] data box.
To clear the EBL, open the pop-up menu, then tap [EBL] and [Clear].
EBL/VRM
box
Drag
VRM
End EBL
Drag
EBL
Bearing
EBL
84.7°
to object
EBL
84.7°
OR
End EBL
Bearing
EBL
84.7°
to object
EBL
84.7°
Drag slider
Drag slider
(or tap bar or +, - icons)
(or tap bar or +, - icons)
7. RADAR
End EBL
Tap [End EBL]
to anchor EBL
and exit.
7-11