How To Activate Or Deactivate The Target Analyzer; How To Emphasize Rain Clutter Or Target Echoes; Rezboost - Suzuki SMD16 Operator's Manual

7.23.1

How to activate or deactivate the target analyzer

Turn [Target Analyzer] on or off from the pop-up menu.
7.23.2

How to emphasize rain clutter or target echoes

You can emphasize rain clutter or target echoes when the target analyzer is active.
Open the [Radar] menu, then set [Target Analyzer Mode] to [Rain] or [Target] as ap-
propriate.
7.24

RezBoost

The azimuth resolution of the radar echoes can be switched in the range of 1-2 times,
with the radar sensor FURUNO DRS4D-NXT/DRS6A-NXT. Four settings are avail-
able, [Standard], [Enhanced1], [Enhanced2], or [Enhanced 3]. Select [Enhanced 3] for
better echo resolution.
1. Select [Radar Filters] from the pop-up menu.
2. Select [RezBoost].
3. Select desired setting.
Standard setting
Conventional radar echoes
Enhanced 2 setting
Sharper than standard by 1.5 times
Equivalent to 2.7° beam width
Operating mode and range
Single range: 0.063 to 72 NM, Target Analyzer ON, single range: 0.063 to 24 NM
Dual range: 0.063 to 12 NM, Target Analyzer ON, dual range: 0.063 to 12 NM
™
Enhanced 1 setting
Sharper than standard by 1.2 times
Equivalent to 3.4° beam width
Enhanced 3 setting
Sharper than standard by 2 times
Equivalent to 2.0° beam width
7. RADAR
7-25