How To Show Or Hide The Scale Box - Suzuki SMD16 Operator's Manual

9.4.7

How to show or hide the scale box

The scale box, shown at the bottom-left corner on the display, shows depth and TX
frequency. You can show the box as follows.
1. Tap the cross section display to show the pop-up menu.
2. Select [Scale Box] to show the scale box.
9.4.8 Availability of points and event marks registration, and go to a
point
For how to register points and event marks, see section 5.2.
The table below shows function availability according to latitude/longitude, heading
data presence or absence. If there is no latitude/longitude data, none of the functions
below are available.
For a multi function display, input PGN data. The PGN data available is as shown be-
low.
Latitude/longitude data
• 129025 Position, Rapid Update
• 129029 GNNS Position Data
Heading data
• 127250 Vessel Heading
• 130577 Direction Data
Latitude/Longitude / Heading data: YES
Item
Point registration
Go to point
Event mark registration
Latitude/Longitude: YES, Heading data: NO
Item
Point registration
Go to point
Event mark registration
9. MULTI BEAM SONAR FURUNO DFF-3D
Cross section
Yes
No
Yes
Starboard
No
No
Yes
9-9