How To Edit The Display Icons; How To Add The New Display Icon - Suzuki SMD16 Operator's Manual

1. SYSTEM INTRODUCTION
1.7

How to Edit the Display Icons

The default home screen arrangement provides seven displays (icons) in configura-
tions according to the equipment that you have in your network. If the arrangement
does not meet your requirements, you can change the display icons to suit your
needs. You can have a maximum of 16 display icons, in full screen, 2-way or 3-way
split screens. For example, you can show the radar and sounder (fish finder) displays
in a 2-way split screen.
The displays available depend on the display division selected and your system con-
figuration. The table below outlines the display divisions and available displays.
Display division
Full screen
2-way split screen
3-way split screen
1.7.1

How to add the new display icon

1. Tap the [Home] icon to show the home screen.
2. Tap the + icon, shown right. (If the icon is not shown, this means
that all available display icons (16) have been used. Erase an
unnecessary icon to make room. See paragraph 1.7.2.)
3. Follow the instructions below to create a display icon.
Display
division
choices
Your arrangement is then opened on the screen and the home screen is updated ac-
cording to your arrangement.
1-16
Engine, Plotter, weather, radar, sounder, camera,
multi sounder, side scan, cross section, 3D history
Plotter, radar, sounder, multi sounder, side scan
Engine, Plotter, radar, sounder, camera,
multi sounder, side scan, cross section, 3D history
Custom display area Custom display area
Drag Drag
display display
division division
*: Drag the display page to the center of
the location where you want to place it.
Available displays
Tap to save icon.
Drag Drag
display display
type* type*
Display
choices