Power Supply Connections; Led Indicators - Optical Systems Design OSD2790SFP Quick Start Manual

5 Power Supply Connections

Connect the two IEC Power connectors to PSU 1 and PSU 2 located on the rear of the unit.
The OSD2790SFP requires external 90 to 264V

6 LED Indicators

LED
PSU 1
PSU 2
Status
Port Status LED will indicate the below information.
SFP 1-24
Port Status LED will indicate the below information.
SFP 25-28
PAGE 9
OSD2790SFP QUICK START GUIDE
OPTICAL SYSTEMS DESIGN
AC
FIGURE 3: POWER CONNECTION
TABLE 2: LED FUNCTION
Red – PSU 1 Not connected or faulty
•
Green – PSU 1 On
•
Red – PSU 2 Not connected or faulty
•
Green – PSU 2 On
•
Red – Standby/Initialization Mode
•
Green – Normal status
•
Green – 1Gbps
•
Amber – 100MBps
•
Off – No Connection
•
Green – 1Gbps
•
Off – No Connection
•
@ 55VA Max power.
Function
DOC ID: 10117502