Closing The Cover Plate Of An Rru Cabling Cavity - Huawei RRU3832 Installation Manual

RRU3832&RRU3632
Installation Guide
Figure 9-25 Installing a CPRI fiber optic cable
l To avoid any damage to fiber optic cables, the cables connected to the RRU must be installed
Step 3 Connect the end labeled 2A and 2B of the fiber optic cable to the optical module on the BBU
side.
Step 4 Route the cables according to the instructions in
ties to bind the cables.
Step 5 Label the installed cables according to the instructions in Attaching an L-Shaped Label.
----End

9.12 Closing the Cover Plate of an RRU Cabling Cavity

This section describes the procedure for closing the cover plate of an RRU cabling cavity.
Issue 05 (2014-06-30)
NOTICE
according to the installation process. For details about the installation process, see
Installation Process.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9.1 Cabling Requirements, and then use cable
9 Installing RRU Cables
9.3
110