Huawei RRU3832 Installation Manual page 127

RRU3832&RRU3632
Installation Guide
Step 2 Strip the specified length of the sheath off the power cable, as shown in
Figure 12-3 Stripping the specified length of sheath
Step 3 Strip a specified length of sheath off each core wire. The length must be consistent with the
length of the notch in the tool-less female connector (pressfit type), as shown in
Figure 12-4 Stripping the sheath off each core wire
Figure 12-5 Matched length
Step 4 Add a tool-less female connector (pressfit type) to two core wires.
1.
Issue 05 (2014-06-30)
Tighten the screws using a Phillips screwdriver, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12 Appendix
Figure 12-3.
Figure 12-4.
Figure 12-6.
118