RRU3942&RRU3642
Installation Guide
8.12 Installing an RRU Alarm Cable
This section describes the procedure for installing an RRU alarm cable.
Procedure
Step 1 Connect the DB15 connector at one end of the RRU alarm cable to the EXT_ALM port on the
RRU, as shown in
Figure 8-29 Installing an RRU alarm cable
Step 2 Connect the eight cord end terminals at the other end to external alarm devices.
Step 3 Route the cables according to the instructions in
ties to bind the cables.
Step 4 Label the installed cables according to the instructions in Attaching an L-Shaped Label.
----End
8.13 Closing the Cover Plate of an RRU Cabling Cavity
This section describes the procedure for closing the cover plate of an RRU cabling cavity.
Issue 07 (2013-12-30)
Figure
8-29.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8.1 Cabling
Requirements, and then use cable
8 Installing RRU Cables
111