Table of Contents
Advertisement
RRU3832&RRU3632
Installation Guide
Item
(3) Indicators
Table 3-2
Table 3-2 Usage of RF ports for RRU3832
Product Version
DBS3900 WCDMA
V200R013C00
DBS3900 WCDMA
V200R014C00 and
later versions
Issue 05 (2014-06-30)
Silkscreen
RET
RUN
ALM
ACT
VSWR
CPRI0
CPRI1
NOTE
l The port for transmitting RET signals is determined by the software.
l For the RRU3832, CPRI0 is connected to the BBU or an upper-level RRU and CPRI1 is connected to
a lower-level RRU.
l For the RRU3632, CPRI0 is connected to the BBU and the CPRI1 is reserved.
describes how to use RF ports for RRU3832.
TX/RX
Channe
l
1 x 2T2R 2
1 x 1T2R 2
1 x 2T2R 2
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Remarks
Communication port for the RET antenna,
supporting RET signal transmission
See
3.3 RRU
Number
Usage
of Used
RF Ports
ANT_TX/RXA and
ANT_TX/RXB are used
together.
It is recommended that
ANT_TX/RXA and
ANT_RXC be used
together.
You can also use ANT_TX/
RXB and ANT_RXD
together.
ANT_TX/RXA and
ANT_TX/RXB are used
together.
3 Information About the Installation
Indicators.
Remarks
A single
sector
A single
sector
A single
sector
10
Advertisement
Table of Contents
