Huawei RRU3832 Installation Manual page 78

RRU3832&RRU3632
Installation Guide
Step 2 Install the RRU mounting brackets, as shown in
Figure 8-29 Installing the RRU mounting brackets
1.
2.
Step 3 Use a 16 mm (0.67 in.) M10 torque wrench to tighten the nuts to 40 N·m (354.03 lbf·in.) so that
the mounting brackets are secured onto the angle steel, as shown in
Issue 05 (2014-06-30)
Figure 8-28 Distance between the mounting brackets and the ground
NOTE
It is recommended that the mounting brackets be installed at a height of 1200 mm (47.24 in.) to 1600
mm (62.99 in.) above the ground.
NOTE
Verify that the arrows on the mounting brackets are pointing up.
Adjust the position of the nut and remove one end of the square-neck bolt from the slot on
the auxiliary bracket.
Slide the mounting brackets onto the angle steel horizontally and insert the square-neck
bolt into the slot.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 8-29.
Figure
8 Installing the RRU
8-30.
69