RRU3832&RRU3632
Installation Guide
(1) Main bracket
Step 6 Use an inner hexagon screwdriver to remove the attachment plate from one side of the RRU,
reinstall the attachment plate onto the rear of the RRU, and tighten the four stainless screws to
5 N·m (44.25 lbf·in.), as shown in
Figure 8-39 Installing the attachment plate onto the rear of the RRU
Step 7 Install the RRU onto the main bracket, as shown in
Figure 8-40 Installing the RRU onto the main bracket
Issue 05 (2014-06-30)
(2) Pole installation bracket
Figure
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8-39.
Figure
8-40.
8 Installing the RRU
76