Table of Contents
Advertisement
RRU3832&RRU3632
Installation Guide
Figure 3-17 Angle steel specifications
Angle steel supports the standard or reverse installation of a single RRU only.
Figure 3-18
Figure 3-18 RRU installed on angle steel
Installing an RRU on a Wall
The wall for installing RRUs must meet the following requirements:
l
l
Issue 05 (2014-06-30)
NOTICE
shows an RRU installed on angle steel.
For each RRU, the wall must be able to bear a weight four times the RRU's weight and the
bolts' pulling force of 1.25 kN (281.25 lbf) vertical to the wall.
Expansion anchor bolts must be tightened to 30 N·m (265.52 lbf·in.) so that the bolts stay
secured without damaging the wall.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Information About the Installation
22
Advertisement
Table of Contents
