Cable Connections - Huawei RRU3832 Installation Manual

RRU3832&RRU3632
Installation Guide
l
l
l

9.2 Cable Connections

This section describes the cable connections for a single RRU and multiple RRUs.
Figure 9-8
Issue 05 (2014-06-30)
Figure 9-6 CPRI fiber optic cables routed through the cabinet (2)
Figure 9-7 FE/GE cables routed through the cabinet
If fiber optic cables need to be routed on the tower platform, lay out the cables on the
guardrail with the shortest distance and route the cables along the guardrail.
If fiber optic cables need to be routed close to a device on the tower, secure the cables to
the guardrail or pole with cable clips. The device cannot be far away from the position for
securing the cables.
If the fiber optic cables close to a device are too long, coil the excess of the cables and
secure them on the tower.
NOTE
l A lower-level RRU obtains power directly from the external power system, but not from an upper-
level RRU using a power cable.
shows the cable connections for a single RRU.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Installing RRU Cables
92