Huawei RRU3832 Installation Manual page 70

RRU3832&RRU3632
Installation Guide
Figure 8-15 Removing the RRU main bracket
(1) Main bracket
Step 3 Install the third main bracket and install the third RRU onto the third main bracket. Then use an
inner hexagon torque screwdriver to tighten the captive screw into the connection holes on the
top of the attachment plate and main bracket for the RRU, with a torque of 5 N·m (44.25 lbf·in.),
as shown in
The third main bracket must be installed with the opening ends of U-shaped slots on both sides
facing downwards.
Figure 8-16 Installing the third RRU onto the third main bracket
Issue 05 (2014-06-30)
Figure 8-16.
NOTICE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(2) Pole installation bracket
8 Installing the RRU
61