Table of Contents
Advertisement
RRU3832&RRU3632
Installation Guide
l Do not stand the RRU upright because the RF ports cannot support the weight of the RRU.
l Place a foam pad or cardboard under the RRU to protect the RRU housing from damage
Context
Figure 8-20
When the width of the narrower edges of the U-steel is less than 40 mm (1.57 in.), only the a
and b modes are supported.
Figure 8-20 Top view of the RRU
(1) U-steel
Procedure
Step 1 Determine a position for installing the mounting brackets.
l
l
Issue 05 (2014-06-30)
NOTICE
during the installation.
shows the top view of the RRU installed on U-steel.
NOTICE
If the RRU must be installed on U-steel secured on a tower, see
Single RRU
to determine a position.
If the RRU must be installed on U-steel secured on the ground, see
a position.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Installing the RRU
3.5.1 Clearance for a
Figure 8-21
to determine
64
Advertisement
Table of Contents
