Buzzer Switch; Device Maintenance; Schedule Reboot - HIKVISION HiWatch Series User Manual

Two authentication types are selectable, if you select digest, only the request with digest
authentication can access the video stream by the RTSP protocol via the IP address. For
security reasons, it is recommended to select digest as the authentication type.
ISAPA
ISAPI (Internet Server Application Programming Interface) is an open protocol based on HTTP,
which can realize the communication between the system devices (e.g., network camera,
NVR, etc.). The video recorder is as a server, the system can find and connect the video
recorder.
HTTP
The admin user account can disable the HTTP service from the GUI or the web browser. After
the HTTP is disabled, all the related services, including the ISAPI, Onvif and Gennetc, will
terminate as well.
HTTP Authentication
If you need to enable the HTTP service, you can set the HTTP authentication to enhance the
access security. Two authentication types are selectable, for security reasons, it is
recommended to select digest as the authentication type.
IP Camera Occupation Detection
The function detects the network camera status. If the network camera has been added by
another video recorder, the network camera status will show as
3. Click Apply.

7.4 Buzzer Switch

You can enable or disable buzzer with alarm linkage or exceptional linkage.
Steps
1. Click at the upper-right corner.
2. Click More.
3. Go to Buzzer Switch.
4. Turn on or turn off Enable.

7.5 Device Maintenance

7.5.1 Schedule Reboot

The device will automatically restart according to the schedule.
Steps
1. Click at the upper-right corner.
2. Click More.
Network Video Recorder User Manual
80
in Online Device list.