Connecting Scansnap; Installing The Supplied Software; Installing Adobe Acrobat 6.0; Installing Scansnap Manager, Cardminder And Pdf Thumbnail View - Fujitsu ScanSnap fi-5110EOX Getting Started

2. Connecting ScanSnap

This chapter describes how to connect ScanSnap to your
PC.

2.1. Installing the Supplied Software

Before connecting the scanner to your computer, please
install the following software on your PC.
Adobe Acrobat 6.0
ScanSnap Manager
CardMinder
PDF Thumbnail View
ATTENTION
• Be sure to install "ScanSnap Manager"
before connecting the scanner to your
PC.
If the scanner is connected before installing
ScanSnap Manager, the "Found New Hardware
Wizard" appears (This screen may differ
depending on the used OS). In this case, click
the [Cancel] button to close the wizard.
• It is not possible to simultaneously connect both
ScanSnap fi-5110EOX and fi-4110EOX series
scanners (or two or more fi-5110EOX
scanners) to one computer.
• If any driver of the ScanSnap fi-4110EOX
series has already been installed on your
computer, uninstall it before starting the
installation.
• In case of ScanSnap fi-4010CU, you can use it
with this scanner without uninstall its driver.
• When using Windows 2000 or Windows XP, log
on as a user with administrator privileges.
• ScanSnap fi-5110EOX is required as follows:
CPU: Intel
(recommended: Intel
1.8GHz or higher)*
Memory: 128MB or more
* If the CPU and the memory do not meet the
recommended requirements or the USB
version is 1.1, the scanning speed will slow
down.
ScanSnap Manager includes the driver software for
HINT
ScanSnap! fi-4110EOX2. You can use this driver
also for ScanSnap! fi-4110EOX2, if you have.
* It is not possible to simultaneously connect
ScanSnap fi-5110EOX and ScanSnap!
fi-4110EOX2 to one personal computer.
6 |
(Application)
(Driver)
(Application)
(Application)
® ®
Pentium III 600MHz or higher
® ®
Pentium 4
(recommended: 256MB or more)*

2.1.1. Installing Adobe Acrobat 6.0

Please prepare the Adobe Acrobat 6.0 CD-ROM.
Adobe Acrobat 6.0 is not supported by
ATTENTION
Windows 98 and Windows Me
1. Insert the "Adobe Acrobat 6.0 CD-ROM" into the
CD-ROM drive.
The "Adobe Acrobat 6.0 AutoPlay" window appears.
This window is not displayed automatically
HINT
when the "Auto play" setting of your computer is
deactivated. In this case, please run
"AutoPlay.exe" of this CD-ROM directly using
the "Explore" or "My computer".
2. Select [Install] and click the [Install Acrobat 6.0
Standard] button.
3. Click the [Next>] button.
The installation starts, and the setup window appears.
4. Follow the instructions to install the software.
Click the [How to install] button on the [Adobe
HINT
Acrobat 6.0 AutoPlay] window to learn more
about the Adobe Acrobat 6.0 installation.
Refer to "Adobe Acrobat Help" about how to
use Adobe Acrobat 6.0.
Suppport and User registration for Adobe
ATTENTION
products
For details, refer to the technical support
information stored in the [Customer Support]
folder on Adobe Acrobat 6.0 Standard
CD-ROM. (Note that free person-to-person
support is not available for this is bundled
product.)
2.1.2. Installing ScanSnap Manager,
CardMinder and PDF Thumbnail View
Please prepare the ScanSnap Setup CD-ROM.
1. Insert the "ScanSnap Setup CD-ROM" into the
CD-ROM drive.
The "ScanSnap Setup" window appears.