After Aspiration; Charging Accuvac Basic - Weinmann ACCUVAC Basic Description And Operating Instructions

4.3 After aspiration

4.4 Charging ACCUVAC Basic

16
Operation
After aspiration:
1. Switch off ACCUVAC Basic by pressing the
button marked O/I.
2. Fit a new disposable collection bag
(see " Disposal of disposable collection bag" on
page 15).
3. Clean ACCUVAC Basic (see "5. Hygienic prepa-
ration" on page 19).
We recommend you to charge ACCUVAC Basic as
soon as the yellow voltage indicator LED lights up. By
doing so you will ensure that it operates for an
adequate period next time it is used.
The power supply for charging must deliver 12.0 V –
13.8 V DC and at least 0.3 ampere. A full charge
takes a maximum of 14 hours.
The following sources can be used for charging:
• The AC adapter/charger plug
• The 12-volt vehicle electrical system with the aid of
the accessory connecting cable WM 10650.
• The mains/charger unit WM 2645 available as
an accessory.
21
supplied.
11