Classifier Example - ZyXEL Communications GS2220 Series User Manual

Table 93 Advanced Application > Classifier > Classifier Configuration > Classifier Global Setting
L ABEL
Active
Interval
Apply
Cancel
21.5 C la ssifie r Exa m ple
The following screen shows an example where you configure a classifier that identifies all traffic from
MAC address 00:50:ba:ad:4f:81 on port 2.
Chapter 21 Classifier
DESC RIPT IO N
Select this to allow the Switch to create a log when packets match a classifier rule during a defined
time interval.
Select the length of the time period (in seconds) to count matched packets for a classifier rule. Enter
an integer from 0 – 65535. 0 means that no logging is done.
Click to save your changes to the Switch's run-time memory. The Switch loses these changes if it
Apply
is turned off or loses power, so use the
the non-volatile memory when you are done configuring.
Click to begin configuring this screen afresh.
C a nc e l
GS2220 Series User's Guide
link on the top navigation panel to save your changes to
Sa ve
214