Vlan Status - ZyXEL Communications GS2220 Series User Manual

802.1Q Sta tic VL AN
Make sure
802.1Q
Use a static VLAN to decide whether an incoming frame on a port should be
• sent to a VLAN group as normal depending on its VLAN tag.
• sent to a group whether it has a VLAN tag or not.
• blocked from a VLAN group regardless of its VLAN tag.
You can also tag all outgoing frames (that were previously untagged) from a port with the specified
VID.
9.3 VL AN Sta tus
Use this screen to view and search all static VLAN groups. Click
navigation panel to display the
Advanced Application > VLAN: VLAN Status
Fig ure 111
The following table describes the labels in this screen.
Table 49 Advanced Application > VLAN: VLAN Status
L ABEL
VLAN Search by
VID
The Number of
VLAN
The Number of
Search Results
Index
VID
Name
Chapter 9 VLAN
is selected in the
Ba sic Se tting
VL AN Sta tus
DESC RIPT IO N
Enter (an) existing VLAN ID numbers (use a comma (,) to separate individual VLANs or a dash (–)
to indicate a range of VLANs. For example, "3,4" or "3–9") and click
specified VLANs in the list below.
Leave this field blank and click
This is the number of VLANs configured on the Switch.
This is the number of VLANs that match the searching criteria and display in the list below.
This field displays only when you use the
This is the VLAN index number. Click an index number to view more VLAN details.
This is the VLAN identification number that was configured in the corresponding VLAN
configuration screen.
This fields shows the descriptive name of the VLAN.
GS2220 Series User's Guide
> screen.
Switc h Se tup
Adva nc e d Applic a tio n
screen as shown next.
to display all VLANs configured on the Switch.
Se a rc h
button to look for certain VLANs.
Se a rc h
137
> from the
VL AN
to display only the
Se a rc h