Error-Disable Recovery Configuration - ZyXEL Communications GS2220 Series User Manual

Table 155 Advanced Application > Errdisable > Errdisable Detect (continued)
L ABEL
Apply
Cancel
33.6 Erro r- Disa b le Re c o ve ry C o nfig ura tio n
Use this screen to configure the Switch to automatically undo an action after the error is gone. Click the
link next to
C lic k He re
the screen as shown.
Advanced Application > Errdisable > Errdisable Recovery
Fig ure 238
The following table describes the labels in this screen.
Table 156 Advanced Application > Errdisable > Errdisable Recovery
L ABEL
Active
Reason
*
Timer Status
Interval
Apply
Cancel
Chapter 33 Error-Disable
DESC RIPT IO N
Click to save your changes to the Switch's run-time memory. The Switch loses these
Apply
changes if it is turned off or loses power, so use the
your changes to the non-volatile memory when you are done configuring.
Click to begin configuring this screen afresh.
C a nc e l
Errdisa b le Re c o ve ry
DESC RIPT IO N
Select this option to turn on the error-disable recovery function on the Switch.
This field displays the supported features that allow the Switch to shut down a port or discard
packets on a port according to the feature requirements and what action you configure.
Use this row to make the setting the same for all entries. Use this row first and then make
adjustments to each entry if necessary.
Changes in this row are copied to all the entries as soon as you make them.
Select this check box to allow the Switch to wait for the specified time interval to activate a port
or allow specific packets on a port, after the error was gone. Clear the check box to turn off this
rule.
Enter the number of seconds (from 30 to 2592000) for the time interval.
Click to save your changes to the Switch's run-time memory. The Switch loses these
Apply
changes if it is turned off or loses power, so use the
your changes to the non-volatile memory when you are done configuring.
Click to begin configuring this screen afresh.
C a nc e l
GS2220 Series User's Guide
link on the top navigation panel to save
Sa ve
in the
Adva nc e d Applic a tio n
link on the top navigation panel to save
Sa ve
313
> screen to display
Errdisa b le