Nebula Switch Registration - ZyXEL Communications GS2220 Series User Manual

Fig ure 107
Select
Ac tive
registered in the NCC, it will go into cloud management mode.
In cloud management mode, NCC will first check if the firmware on the Switch needs to be upgraded. If
it does, the Switch will upgrade the firmware immediately. If the firmware does not need to be
upgraded, but there is newer firmware available for the Switch, then it will be upgraded according to
the firmware upgrade schedule for the Switch on the NCC. Below is the process for upgrading firmware:
1
Download firmware through the NCC.
2
Upgrade the firmware and reboot.
Note: While the Switch is rebooting, do NOT turn off the power.
Clear
Ac tive
in standalone mode.
8.11.2 Ne b ula Switc h Re g istra tio n
Click
Ba sic Se tting
Fig ure 108
This screen has a QR code containing the Switch's serial number and MAC address for handy NCC
registration of the Switch using the Nebula Mobile app. First, download the app from the Google Play
store for Android devices or the App Store for iOS devices and create an organization and site.
Chapter 8 Basic Setting
Basic Setting > Cloud Management > Nebula Control Center Discovery
to turn on NCC discovery on the Switch. If the Switch has Internet access and has been
to turn off NCC discovery on the Switch. The Switch will NOT discover the NCC and remain
>
C lo ud Ma na g e m e nt
Basic Setting > Cloud Management > Nebula Switch Registration
GS2220 Series User's Guide
>
Ne b ula Switc h Re g istra tio n
132
to display this screen.