Labels - Guardian Fall Protection 00370 Instruction Manual

Labels

Anchorage Connector
manufacturer's instructions
provided with equipment.
Compliant with OSHA 1910,
ANSI A10.32-2012 regulations.
Type A anchorage connector.
(min. breaking strength).
Min. service temperature: -30° F.
All PFAS equipment must be
selected and deemed compatible
connections. Refer to instructions
for proper installation and
90200 (Rev. E) / Made in Taiwan
10
1-800-466-6385
www.guardianfall.com
D-Bolt Forged
Part #:
Date of Manufacture:
Serial #:
PRIOR TO USE, read
and understand all
OSHA 1926 Subpart M,
ANSI Z359.18-2017, &
Capacity: 130-420 lbs.
(including equipment).
5,000 lb. MBS
by Competent Person.
Only make compatible
connection methods.
!
WARNING
Maximum 1 connection.
Avoid contact with hazards,
including, but not limited to,
heat, chemicals, electricity,
and sharp or abrasive
edges and surfaces.
INSPECTION GRID
User must inspect prior to EACH use.
Competent Person must complete
formal inspection every 12 months.
Competent Person to inspect and initial.
Date of First Use: _______________
Product lifetime is indefinite as long
as equipment passes pre-use and
Competent Person inspections.
YR
20__ 20__ 20__ 20__
MO
J
F
M
A
M
J
J
A
S
O
N
D
If equipment fails
inspection, IMMEDIATELY
REMOVE FROM SERVICE
DO NOT
REMOVE LABELS
20__
85007 (Rev. G)