Table of Contents
Advertisement
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support,
Gigabit Ethernet Ports, and 2 FXS Ports
User Manual
Creating PPPoE or PPPoA WAN Connection
To create a connection of the PPPoE or PPPoA type, click the ADD button (
Connections Setup / WAN page in the Connections List section. On the opened page, go to
the All Settings tab. Then select the relevant value from the Connection Type drop-down list
and specify the needed values.
Figure 70. The page for creating a new PPPoE connection. Selecting a connection type.
Parameter
Interface
Enable connection
Connection name
For the PPPoE type only.
A physical interface to which the new connection will be assigned.
In order to create an Ethernet WAN connection, select the WAN
value or the value corresponding to the LAN port specified as the
WAN port.
In order to create a VDSL WAN connection, select the PTM value.
In order to create an ADSL WAN connection, select the value
corresponding to the existing interface or the Add new ATM PVC
value for creating a new interface at the physical layer.
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
A name for the connection for easier identification.
Page 89 of 266
Configuring via Web-based Interface
Description
) on the
Advertisement
Table of Contents
