Chapter 3. Installation And Connection; Before You Begin - D-Link DWR-980 User Manual

Wireless ac1200 4g lte router with vdsl2 support, gigabit ethernet ports, and 2 fxs ports
Hide thumbs Also See for DWR-980:
Table of Contents

Advertisement

DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support,
Gigabit Ethernet Ports, and 2 FXS Ports
User Manual
CHAPTER 3.

Before You Begin

Please, read this manual prior to installing the device. Make sure that you have all the necessary
information and equipment.
Operating System
Configuration of the wireless dual band gigabit VoIP router with 3G/LTE support
(hereinafter referred to as "the router") is performed via the built-in web-based interface. The web-
based interface is available from any operating system that supports a web browser.
Web Browser
The following web browsers are recommended:
Apple Safari 8 and later
Google Chrome 48 and later
Microsoft Internet Explorer 10 and later
Microsoft Edge 20.10240 and later
Mozilla Firefox 44 and later
Opera 35 and later.
For successful operation, JavaScript should be enabled on the web browser. Make sure that
JavaScript has not been disabled by other software (such as virus protection or web user security
packages) running on your computer.
Wired or Wireless NIC (Ethernet or Wi-Fi Adapter)
Any computer that uses the router should be equipped with an Ethernet or Wi-Fi adapter (NIC). If
your computer is not equipped with such a device, install an Ethernet or Wi-Fi adapter prior to using
the router.
Wireless Connection
Wireless workstations from your network should be equipped with a wireless 802.11a, b, g, n, or ac
NIC (Wi-Fi adapter). In addition, you should specify the values of SSID, channel number and
security settings defined in the web-based interface of the router for all these wireless workstations.
VoIP
On order to use VoIP over SIP, you need to connect an analog phone to an FXS port of the router.
Then access the web-based interface of the router, and you will be able to configure all needed
settings.
SIM Card
To connect to to the Internet via mobile operators' networks, you should use an active SIM card.
Then you will be able to configure a connection to the Internet.
5 Contact your operator to get information on the service coverage and fees.
INSTALLATION AND CONNECTION
Page 19 of 266
Installation and Connection
5
DWR-980

Advertisement

Table of Contents
loading

Table of Contents