D-Link DWR-980 User Manual page 78

DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support,
Gigabit Ethernet Ports, and 2 FXS Ports
User Manual
Figure 60. The page for creating a new Static IPv4 connection. The IPv4 section.
Parameter
IP Address
Netmask
Gateway IP address
Primary DNS server/
Secondary DNS server
Obtain DNS server
addresses
automatically
Primary DNS server/
Secondary DNS server
Vendor ID
Host name
IPv4
For Static IPv4 and IPoA types
Enter an IP address for this WAN connection.
Enter a subnet mask for this WAN connection.
Enter an IP address of the gateway used by this WAN connection.
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
For Dynamic IPv4 type
Move the switch to the right to configure automatic assignment of
DNS server addresses. Upon that the Primary DNS server and
Secondary DNS server fields are not available for editing.
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
The identifier of your ISP. Optional.
A name of the router specified by your ISP. Optional.
Page 78 of 266
Configuring via Web-based Interface
Description