Table of Contents
Advertisement
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support,
Gigabit Ethernet Ports, and 2 FXS Ports
User Manual
To change parameters of a code, select the relevant line in the table.
Figure 169. The VoIP / Call Feature Codes page. The window for editing the code parameters.
In the opened window, specify the needed parameters:
Parameter
VSC
Line 1 / Line 2
Line 1 / Line 2
Click the SAVE button.
The value of the code. If the code ends with * (the asterisk key),
further you can enter a value for the function in use (a number for
call forwarding or time for the alarm clock). For example, the code
for enabling the alarm clock: *55*HHMM#, where HHMM is time
in 24-hour format.
Dialing from Phone
Move the switch of the relevant line to the right to enable the code
for the phone connected to the FXS port of the router.
Move the switch of the relevant line to the left to disable the code
for this phone.
Sending to Server
Move the switch of the relevant line to the right to inform the SIP
server when a user dials the code on the phone.
Move the switch of the relevant line to the left if the server should
not be informed.
Page 222 of 266
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
