Table of Contents
Advertisement
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support,
Gigabit Ethernet Ports, and 2 FXS Ports
User Manual
The PTM section is displayed for VDSL WAN connections.
Figure 65. The page for creating a new Static IPv6 connection. The PTM section.
Parameter
MAC address
PTM
A MAC address assigned to the interface. This parameter is
mandatory if your ISP uses MAC address binding. In the field, enter
the MAC address registered by your ISP upon concluding the
agreement.
To set the MAC address of the network interface card (of the
computer that is being used to configure the router at the moment)
as the MAC address of the WAN interface, move the Clone MAC
address of your NIC switch to the right. When the switch is
moved to the right, the field is unavailable for editing.
To set the router's MAC address, click the RESTORE DEFAULT
MAC ADDRESS button (the button is available when the switch is
moved to the right).
Page 83 of 266
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
