Creating Pppoe Or Pppoa Wan Connection - D-Link DSL-2750U User Manual

DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual

Creating PPPoE or PPPoA WAN Connection

On the connection creation page, go to the All Settings tab. Then select the relevant value from
the Connection Type drop-down list and specify the needed values.
Figure 62. The page for creating a new PPPoE connection. Selecting a connection type.
Parameter
Interface
Enable connection
Connection name
For the PPPoE type only.
A physical interface to which the new connection will be assigned.
In order to create an Ethernet WAN connection, select the value
corresponding to the LAN port specified as the WAN port.
In order to create an ADSL WAN connection, select the value
corresponding to the existing interface or the Add new ATM PVC
value for creating a new interface at the physical layer.
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
Available for the advanced mode only.
A name for the connection for easier identification.
Page 80 of 210
Configuring via Web-based Interface
Description